+27 64 178 4275
RCF ART 915A 2100 15″ Active Speaker
R19399,00
- Up to 131 dB Sound Pressure Level
- 2100W Class-D Bi-Amplification
- 45-20000 Hz linear frequency response
- 1.75″ Compression Driver
- 15″ Woofer
- FiRPHASE zero degrees phase technology
- Bass Motion Control woofer excursion management
ART 915-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75″ compression driver, 15″ woofer, two-channel 2100W amplifier, and a constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 131 dB SPL, distortion-free sound.
Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.
Power that moves
The most powerful amplifier in its class. RCF’s improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss.
ART 9 is very energy-efficient so there is no need for a cooling fan – the amplifier is attached to a solid aluminum heat exchanger in the back of the unit – with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet.
The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.
The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.
High frequencies
Low frequencies
SHIPPING & DELIVERY
At Tronic ProAudio, we partner with trusted South African courier services including The Courier Guy and MDS Collivery.net to ensure your order reaches you safely. Once your order has been dispatched, you’ll receive a confirmation email along with a tracking number to monitor your delivery.
We strive to process and dispatch all orders promptly. Delivery timelines are subject to factors such as payment confirmation, address verification, delivery area, and product availability.
In the unlikely event that you receive the wrong item or a defective product, please email us a return request within 3 working days of receiving your order. Kindly note that we do not offer cash refunds.
Related products
Alto Professional TS410 2,000-watt 10-inch Powered Speaker
- 2,000-watt Powered Speaker with 10" LF Driver, 1" Exit Ceramic Driver, Bluetooth Connectivity, and 3-ch Mixer (each)
Features:
- 2,000W capabilities provides astonishing speaker power at nearly any venue
- True Wireless Bluetooth linking for responsive and authentic audio playback
- Built-in 3-channel mixer lets you optimize your frequencies for any performance setting
- Lightweight build offers an easy travel and transport solution — perfect for traveling artists and gig-to-gig use
- Pole-mount, wedge, or suspension use integrates easily into a variety of setups
- Class D amplifiers feature a unique cooling build to ensure long-term performance
- Remote control and speaker settings available via free Alto app
Electro-Voice EKX-12P 1500W 12 inch Powered Speaker
- QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD.
- High-efficiency 1500 W Class D power amplifier delivers up to 132 dB peak SPL on the EKX-12P via high-sensitivity transducers designed and engineered by EV.
- Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions.
- EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage.
- Lightweight, compact 15-mm wood enclosure with internal bracing, durable EVCoat finish, eight M10 threaded mounting points, aluminum pole mounts, and all-metal handles.
Electro-Voice EKX-15P 1500W 15 inch Powered Speaker
- 1,500W Class D amplifier with 15" woofer and 1" high-frequency titanium compression driver
- 44Hz-20kHz frequency range and 134dB maximum SPL deliver immersive sound and room-shaking volume
- Signal Synchronized Transducer (SST) waveguide design ensures that your audience experiences precise and consistent coverage
- 2-channel mixer with XLR, TRS, and RCA inputs along with flexible gain controls and a convenient clip indicator
- QuickSmartDSP provides effective system optimization with presets for your application and location
- Programmable crossover for easy subwoofer integration
- Intelligent thermal management with variable-speed fan keeps your system cool
- Mount it on a tripod, stack it on a subwoofer, suspend it, or position it onstage for monitoring
- Light weight and built-in handles provide for easy transportation
- Rugged, road-ready construction
| Frequency Response (-3 dB) | 55 Hz - 18 kHz¹ |
| Frequency Range (-10 dB) | 48 Hz - 20 kHz¹ |
| Maximum SPL | 134 dB² |
| Coverage (H x V) | 90" x 60" |
| Power Rating | 1500 W |
| LF Transducer | EVS-15M 381 mm (15 in) |
| HF Transducer | DH-1M 1-inch titanium compression driver |
| Crossover Frequency | 1.7 kHz |
| Connectors | (1) Stereo RCA input, (2) XLR/TRS combo jack, and (1) XLR link output |
| Enclosure | 15 mm plywood with EVCoat |
| Grille | 18 AWG steel with powdercoat |
| Suspension | (8) M10 threaded mounting points |
| Dimensions (H x W x D) | 685 mm x 432 mm x 429 mm (27 in x 17 in x 17 in) |
| Net Weight | 24.4 kg (53.9 lb) |
| Shipping Weight | 29.5 kg (65.0 lb) |
| Power Consumption | 1.8 A³ |
Electrovoice ELX200-12P 12″ 1200W Powered Speaker
- High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
- EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
- Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX three-handle design for easy lifting.
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
FBT VENTIS-110A 2-way Active speaker – 10″ + 1″ – 700Wrms (class D)+200Wrms (Class AB)
- 10-inch LF woofer with 2-inch voice coil and 1-inch exit B&C HF compression driver with 1.4-inch voice coil
- Bi-amplified design with 700W RMS for LF and 200W RMS for HF, with peak power handling of 1400W (LF) and 400W (HF)
- Frequency response from 58Hz to 20kHz, with a maximum SPL of 131dB peak
- 80° x 50° rotatable dispersion pattern for flexible sound coverage
- Onboard DSP with six pre-optimized settings and two user-configurable slots with five parametric equalizers per slot
- Durable 0.59" birch plywood construction with scratch-resistant finish
- Integrated aluminum handle for easy transport and six M10 suspension points for flexible mounting
- Optional mounting bracket for wall or ceiling installation
- Ideal for portable use or permanent installation in various settings
- General
- Configuration: 2-way
- Amplifier Power (RMS LF/HF): 700W / 200W
- Amplifier Power (Peak LF/HF): 1400W / 400W
- Acoustical
- Frequency Response (-6dB): 58Hz – 20kHz
- LF Woofer: 10" with 2" voice coil
- HF Driver: 1" with 1.4" voice coil
- Max SPL (Continuous/Peak): 124dB / 131dB
- Coverage: 80° x 50°, rotatable horn
- Input Impedance: 22 kΩ
- Power
- AC Power Consumption: 600 VA
- Inputs/Outputs
- Input Connectors: XLR with loop output / Stereo RCA
- Power Cord Length: 16.4 ft
- Mechanical
- Dimensions (HxWxD): 22.04 x 12.95 x 12.79 in
- Net Weight: 34.39 lbs
JBL EON715 1300-watt 15-inch Powered PA Speaker
Features
- Custom-designed 15-inch woofer
- 2414H-1 compression driver
- Re-designed high-frequency horn
- Power: 1,300W peak / 650W RMS
- Frequency response: 45 Hz–20 kHz (-10 dB); 55 Hz–20 kHz (-3 dB)
- Max SPL: 128 dB
- Dispersion: 90° H x 60° V
- Audio I/Os: 2 XLR Combo, 1 XLR passthrough
- Advanced dbx DSP: Automatic Feedback Suppression, ducking, 100ms speaker delay, parametric EQ
- Built-in 3-channel digital mixer
- Backlit color LCD screen provides easy access to functions
- Universal JBL Pro Connect app control
- Bluetooth 5.0 streaming and control
- Durable polypropylene cabinet and metal grille
- Two ergonomic handles simplify transport
- Built-in pole mount and optional EON700 Universal Yoke Mount expand system configuration options
- Stackable cabinets allow easy storage
- Dimensions: 27.6 x 17.2 x 13.8 in (702 x 438 x 351 mm) (HxWxD)
- Weight: 37.3 pounds (16.9 kg)
- Shipping dimensions: 29.92 x 21.73 x 18.38 in (760 x 552 x 467 mm) (HxWxD)
- Shipping weight: 49.6 pounds (22.5 kg)
Specifications
| System Type | 15IN Powered Loudspeaker |
| Woofer Model | 715G |
| Woofer Size | 15" |
| Woofer Magnet | Ferrite |
| Woofer Voice Coil | 2" |
| Tweeter Model | 2414H Compression Driver |
| Tweeter Size | 1'' |
| Tweeter Magnet | Neodymium |
| Transducer Impedence | LF 4ohm rated, HF 8ohm rated |
| Max SPL | 128dB @1m/4Pi |
| Freq Range -10 | 45Hz - 20kHz |
| Freq Range -3 | 55Hz - 20kHz |
| Hor Dispersion | 90° |
| Vert Dispersion | 60° |
| Power Rating | 1300W peak / 650 RMS |
| AC power input | 100V-120V or 220V-240V |
| Cooling | Passive |
| LED indicators | 1 Power LED, 1 Limit LED, 1 Front LED, 2 Signal/SSM LEDs |
| Input Impedance | 50k/100k un-balanced/balanced |
| Input Gain | -∞to +36db |
| Crossover Frequency | 1.9 kHz |
| I/O | 2 XLR Combo Jacks / BT 1 XLR M Thru |
| Cabinet | PP+10% Talc |
| Grille | 16GA perforated steel with acoustically transparent black cloth backing |
| Suspension / Mounting | 4 M10 Suspension points, 36mm Pole Socket, universal yoke bracket holes |
| Handles | 2, cable channel on bottom |
| Net Weight | 17kg (37.48 lbs.) |
| Gross Weight | 21.5kg (47.40 lbs.) |
| Product Dims | HxWxL 716x438x358mm (28.19x17.24x11.09 in.) |
| Shipping Dims | HxWxL 738x543x458mm (29.06x21.38x18.03 in.) |
RCF ART935A Two-Way 15″ 2100W Powered PA Speaker with Integrated DSP
- Advanced DSP with 3 Presets
- FiRPHASE Filters for Coherent Sound
- Bass Motion Control Low-Freq Management
- 100 x 60° Coverage Angle
- Combination XLR-1/4" Inputs + XLR Output
- 45 Hz to 20 kHz Frequency Response
- 133 dB Max SPL Output
- True Resistive Waveguide Technology
- 15" Woofer + 3" Compression Driver
- Configurations for Floor, Stage, Flown
Reviews
There are no reviews yet.